Cautions on the machining process of the decoiler machine

When we use the decoiler machine for processing, there will be a lot of requirements that we need to understand, as well as the matters that need to be paid attention to during the processing, which we need to avoid. The following are the precautions for decoiler machine processing:

1. During the operation, all personnel shall coordinate with each other and follow the command of the person in charge of the rolling plate. If there is no command, it is forbidden to start the machine.

2. Operate in strict accordance with the decoiler machine processing procedures and operation methods. Pay attention to the safe operation of the equipment when the upper roll is lifted to the limit position.

3. When operating, pay great attention to prevent your hands from being pressed by the steel plate and being entangled with the steel plate.

4. During the operation of the leveling machine, if irregular noise, impact and other abnormal phenomena are found, the machine shall be stopped immediately for inspection.

5. When lifting the steel plate or drum by crane, be careful not to collide with the machine. After the completion, make sure that the site is cleared as soon as possible, and that the equipment is well maintained, and the power is turned off in time.

6. After the use of the decoiler machine, it is necessary to clean up the above materials in time, do a good job in the overall cleaning work, check the operation of the equipment for the next use.