How to Operate Common Plate Flange Machine Correctly? What Are the Maintenance Methods?

The common plate flange machine is mainly used to produce common plate flange air ducts. It has high operating efficiency and is widely used in the field of manufacturing.

When using the equipment, it is necessary to install the correct method for operation, and at the same time pay attention to regular maintenance of it, which is conducive to normal operation and can also improve its service life. Below we will introduce the correct operation method and maintenance method of the common plate flange machine!

Ⅰ. Correct operation of common plate flange machine

1. Always check the working condition of the common plate flange machine, especially the needle roller bearing. If it is damaged, it should be replaced and repaired immediately, and cannot be used reluctantly.

2. The four handles on the side should be used for manual operation or machine lifting. Do not break the table of the common plate flange machine, or even use a lift.

3. If it is found that the roller speed of the common plate flange machine is slow or the operation is weak, it may be caused by the relaxation of the V-belt. The motor position can be moved, the V-belt can be re-tensioned, and it can return to normal.

4. The operator needs to frequently add calcium-based grease to the transmission tooth surface of the ordinary plate flange machine to reduce the wear of the tooth surface.

5. When rolling the bite shape of the square tube elbow, remove the feeding guide foot on the right, and add an appropriate amount of lubricating oil during the shearing process of the No. 1 upper and lower rollers, so that there is no sand on the workpiece in the operation workshop.

6. Keep the surface of the rollers of the common plate flange machine clean, clean up the adhesive in time, and apply anti-rust grease on the surface of the rollers when the machine is shut down for a long time.

7. Ordinary flange machines should be maintained every six months, and the upper and lower frame wall plates and needle bearings should be removed, and grease should be reapplied.

Ⅱ. How to maintain the common plate flange machine?

1. The machine tool of the common plate flange machine should be kept clean frequently, and the unpainted part should be coated with anti-rust grease.

2. Before the machine is used, it is necessary to add lubricating oil regularly and quantitatively according to the requirements, and at the same time ensure that the lubricating oil is clean.

3. Non-designated personnel are not allowed to operate the common plate flange machine. Usually, people will leave the machine and stop. Strictly follow the operating procedures.

4. Regularly check whether the V-belt, handle, knob and button of the common plate flange machine are damaged. If the wear is serious, it should be replaced in time and reported for supplementation.

5. Regularly check and repair the switch, insurance and handle of the common plate flange machine to ensure its reliable operation.

6. Lubricate and scrub the machine tool of the common plate flange machine 10 minutes before leaving get off work every day.

7. The lubricating and overflowing oil in the motor bearing of the ordinary plate flange machine should be replaced regularly, and the electrical appliances should be regularly checked for normal, safe and reliable operation.