Installation Precautions and Spinning Technology Analysis of Air Duct Production Line

Ⅰ. What should be paid attention to when installing the air duct in the second line of the air duct production line?

In all walks of life, different types of air ducts produced by the second line of air duct line machines are required. In addition to ensuring the quality of the air ducts produced, attention must also be paid to the installation methods and precautions to ensure that the air ducts are useful.

1. The second line of the air duct production line During the design of civil buildings, different types of work should coordinate the space separation, such as HVAC, water supply and drainage, lighting, etc. It is necessary to calculate the elevation range of each pipeline in detail. The specific construction should not exceed this limit. If there are special circumstances, it is necessary to negotiate with other types of workers.

2. The second line of the air duct production line solves the collision of various ventilation ducts. For example, when the water pipe and the air pipe collide, the water pipe should be turned. If the cold and hot water pipes collide with the sewer pipes, the cold and hot water pipes should be changed.

3. Before the construction of the second line of the air duct production line, the chief engineer should draw several types of pipelines for each type of work on a plan and mark them with different colored pens. Synthesize the elevations at each intersection point to check whether there are any contradictions, which need to be discovered and resolved in time.

4. In order to reduce investment in the second line of air duct production line, we need to save space and reduce its floor height. Some pipes without slope requirements can be laid through beams.

Reasonable and orderly installation of different pipes is the basis for ensuring the normal completion of the entire project, so it must be well coordinated during the design, and at the same time to ensure that the quality of the air ducts must be excellent, and it will be very troublesome to repair after the project is over.

Ⅱ. Spinning technology of air duct production line

In the entire air duct production process, the technology involved is quite complex. If you don't know this, it's hard to understand the principle. For example, spinning technology plays a very important role in the entire air duct production line. So, how does it work?

In fact, spinning technology is mainly divided into two types, namely ordinary spinning technology and strong spinning technology. The main function of ordinary spinning technology is to change the structure of the duct blank. Using this technique in duct production, the wall thickness of the duct changes very little. Ordinary spinning technology affects the quality of the entire air duct to a certain extent. Therefore, this technology must be paid attention to in the production of air ducts to ensure the quality of the air duct.

The powerful spinning technology changes the wall thickness and length of the workpiece, and the effect is much more obvious than the ordinary spinning technology. In actual operation, it is necessary to pay attention to grasp the strength of spinning.