The normal operation of the angle iron flange production line is the guarantee of the effective shaping of the duct. Therefore,
flanging machine manufacturers usually diagonal iron flange production line for proper maintenance, to ensure the normal operation of the machine. In general, we need to maintain the iron flange production line in the following ways.
1, duct clean system The material of the flexible pipe must have the characteristics of dust-proof, tightness, smooth inner wall. Duct equipment and the connection between the more stringent. The quality of the outlet to be qualified, the border and leaves to be smooth.
2, in the production of air valve to open and close the mark. Multi-leaf valve laminating lap joints need to be consistent, seaming machine board total of flange machine duct plasma cutting machine angle iron flange production line and the wheelbase deviation within 1mm. For flexible pipe, the tightness should be appropriate, the length should be within the scope of construction norms, and meet the design requirements. Cracking phenomenon, distortion are not allowed to appear.
3, hood to achieve the integrity of the rules of shape, the center of gravity to maintain balance, size deviation within 2mm per meter and other requirements. Rotating parts of the fire valve need anti-corrosion performance is extremely strong, its close to tight airtight.
The above is the angle iron flange production line in the production process needs to be carried out in the basic maintenance, we do a good job in the above aspects of the maintenance, so as to truly guarantee its stability.
