The Maintenance And Maintenance Of The Lock Former

1. Always check the work of the system, with particular attention to needle roller bearings, if any damage should be immediately replaced repair, must not continue to barely use.
2. Should use the side of the four handles for maneuvering or machine lifting. Do not force to fight the table, or even use lifting the board lifting machine.
3. If you find the wheel speed slows or the operation of the weak phenomenon, may be caused by relaxation of the V-belt, removable motor position, re-tensioned V-belt, that can return to normal.
4. Always add calcium-based grease to the drive tooth surface.
5. Rolling the side of the elbow shape of the elbow, you should take the right feeding by the foot, and in the first row of rolling wheel during the cutting process, add the right amount of lubricating oil on the site can not have sand on the workpiece The
6. Keep the roller surface clean, clean up the adhesive in a timely manner, when the long time to stop the application of anti-rust oil on the surface of the wheel.
7. Seaming machine should be every six months for a maintenance cycle, should be removed from the upper and lower frame wall, needle roller bearings, and re-apply lithium-based grease.