Common Faults and Solutions of Air Duct Production Line Equipment

The air duct production line is a kind of precise mechanical equipment. The quality and stability of qualified air duct production lines are very high. However, with the increase of use time, improper equipment maintenance, worker mistakes and other factors, some problems will occur in the air duct production line. The following examples illustrate the common faults and solutions of the air duct production line.

1. The touch screen of the air duct production line displays the hydraulic overload alarm and flashes

Solution: Check whether the system pressure of the hydraulic station of the air duct production line is too high, whether the oil pump is damaged, whether the thermal relay has tripped, remove the electric box cover, and manually reset the thermal relay.

2. The touch screen of the air duct production line displays the emergency stop and servo alarm of the system and flashes.

Solution: Release the emergency stop button next to the touch screen of the air duct production line.

3. The unwinder of the air duct production line does not stop or unload.

Solution: Check whether the photoelectric switch of the picking rack of the air duct production line is damaged or the connecting line is disconnected. The time relay in the unwinder box is damaged. Check and replace.

4. The air duct production line does not lift the knife after punching the small mouth.

Solution: It may be that the solenoid valve is blocked by debris, just clean the machine.

5. The die and scissors of the air duct production line cannot be operated.

Solution: Check whether the circuit or equipment of the machine is damaged, and replace it in time for maintenance.

6. After the air duct production line is put into production, the size of the sheet is unstable or the sheet only keeps moving.

Solution: Check the encoder and signal line for deviation or damage, and repair it in time.

7. The products produced by the air duct production line have cracks.

Solution: Check whether the raw materials are qualified and whether the operator is negligent.

When using the air duct production line, everyone should pay attention to the correct operation and regular maintenance of the equipment. If there is a serious problem, it is recommended to contact the air duct production line manufacturer for help as soon as possible.

General air duct production line manufacturers will have perfect after-sales service. Pipe production line manufacturers provide maintenance services, so that if there is a problem with the equipment, they can seek help as soon as possible, efficiently solve the equipment failure, quickly resume production, and ensure the smooth progress of the project.

Comifo makes every effort to reassure you of our most valued service. Offers unparalleled after-sales service and attention. In addition to the one-month warranty, we encourage and provide operator training. Welcome customers from all over the world to visit and consult.