Configuration and Basic Maintenance of Three Lines of Air Duct Production Line

Ⅰ. Configuration of the third line of the air duct production line

Under the introduction of the air duct production line manufacturer, we learned that the third line of the fully automatic air duct production line is composed of the following configurations: electric feeding rack, material tray, hydraulic angle shearing machine with mold, hydraulic shearing machine, rib adjustment Flat device, computer, controller, production software, etc.

The third line of air duct production line is a professional equipment for producing air ducts. It is a fully automatic production equipment, and it is very cost-effective in production, and the utilization of materials is more reasonable and material saving. This is different from the second line of other air duct production lines, so it is more suitable for manufacturers to professionally produce batch air ducts.

For the first fixed-length cutting when the third line of the air duct production line is in use, the plasma cutting machine and computer are directly used with CS; then the bone is cut at the same time, and the flange cutting machine used in combination with the C bone; then the TDF is Various connection methods Flange positioning shearing angle, shearing can use various shearing support flange joint angles and linkages, a full set of air ducts.

Ⅱ. Basic maintenance of the third line of the air duct production line

The normal operation and operation of the third line of the air duct production line is inseparable from the normal operation of the machine. Therefore, in order to ensure the normal operation of the machine and ensure that the daily air duct production does not fail and stop, it is necessary to maintain and maintain the third line of the air duct production line. The manufacturer of the air duct production line said that the maintenance of the third line of the air duct production line should be carried out from all aspects.

1. The material requirements for the flexible pipe of the air duct cleaning system are relatively high, and it must have the characteristics of dustproof, good airtightness and smooth inner wall. The connection between it and the air duct equipment must be relatively tight. The appearance requirements of the tuyere are also relatively strict, the quality must be qualified, and the frame and blades must be flat and smooth.

2. There must be an opening and closing mark when making the air valve. The joints of the multi-leaf valve blades need to be consistent, and the wheelbase deviation should be within 1mm. For flexible pipes, the tightness should be appropriate, the length should be within the scope of construction specifications, and meet the design requirements. Cracking and distortion are not allowed.

3. For the production requirements of the hood, the specific performance is that the shape is complete, the center of gravity is balanced, and the size deviation is within 2mm per meter. The rotating parts of the third-line fire damper of the air duct production line need to have strong anti-corrosion performance, and their closing must be tight and airtight.