Duct is used for air delivery and distribution of pipes, there are many forms, the most important can be divided into two types: composite duct and inorganic duct two. In addition, classification according to other ways can also be divided into other types. Different
square duct machine for the corresponding duct production line above have different requirements.
For the production of duct should meet the following conditions. In the production of time to ensure that the compaction, punching, cutting off, seams these are the necessary functions.
For the main purpose of the compaction is to prevent the board before storage because of improper storage, resulting in sheet metal surface bending, for the production of inconvenience, and the quality of the produced products have an impact, so this link is very steward.
For drilling, chamfering function is also very important, mainly because the process of installing the duct, in order to facilitate the installation between the various
square duct machine, if there is no drilling, we have to fight during the installation Hole making, but this is very inconvenient for the operation, more difficult, so the automatic drilling equipment operation, the installation has played a very important role.
Of course, the cut-off function is for the convenience of the manufacturing process. Since it is impossible for each duct to be continuous between the sections, the demand for materials is also limited. Therefore, it is necessary to cut off the functions, The trouble caused by the operation.
Corresponding to the function of the mouth to achieve the function of the sheet metal blank holder operation, the production of joint angle.
Therefore, some functions of the
duct production line is very necessary, every aspect of the production, post-production work is of great help.
