The so-called occlusion machine fault refers to the equipment or system and can no longer work properly due to its own reasons and lost its prescribed function. The faults of the
lockformer machine include the malfunctions of the mechanical components, the malfunctions of the occluder system, the malfunctions of the servo and spindle drive system, and the malfunctions of the auxiliary devices. Faults can be classified according to their form, nature, and cause. The common types of failures are as follows.
1. According to the failure of components of the lockformer machine, the breakdown can be divided into the host part of the host fault and electrical fault CNC machine tools, mainly including machinery, lubrication, cooling, hydraulic, pneumatic and protection devices. Common host faults include mechanical transmission faults caused by improper installation, debugging and operation or excessive friction of the guide rail.
2. The relationship between faults can be divided into related faults and non-related faults. Non-related failures are caused by factors unrelated to the system itself. Related faults can be divided into system faults and random faults.
3. According to diagnostic methods, there are two types: diagnostic failure and non-diagnostic failure. Most modern lockformer machines have more self-diagnostic functions. Maintenance personnel uses these diagnostic alarm Numbers to find faults. The machine stops at a position and the cycle cannot continue without a diagnosis. Even manual enforcement does not help. Since there is no alarm display, the maintenance personnel can only judge according to the phenomenon before and after the failure.
