What are the advantages of strong sealing in duct production? When the duct is manufactured, its connection must be firm and its sealing needs to be strong. Here we will analyze the performance of the product with you to increase the usability and competitiveness of our products.
The position of duct in industrial production is self-evident, many people have a certain understanding of the use of duct, duct material, etc., but they ignore the more critical but easily ignored details. the
duct production line in the production of duct, its connection is one of the neglected points, the following is the details. Situation.
1. Because the duct production line manufacturer and construction are not carried out on the same site, the duct production line produced in the production workshop is semi-finished products. After the semi-finished products are reasonably numbered in sequence, they are then moved to the construction site for unified installation.
2. Generally speaking, the connection between air ducts is carried out using a joint angular bite, so that the air duct will have good sealing performance in the future.
3. For the connection between the branch pipe and the main pipe, the joint bite or the opposite side are riveted with the main pipe by a pulled nail. Glass glue seals are used at the joints to prevent air leakage.
4. For pipe flange and flange, special TFD flange angle is adopted, then the hammer is used to knock it into flange and bolt is used to connect it.
