Three Steps for the Daily Maintenance of CNC Plasma Cutting Machine

In the daily management of CNC plasma cutting machine, preventive maintenance is a very important and active work. As the name implies, the so-called preventive maintenance is to pay attention to the factors that may cause equipment failure and difficult to solve after the failure, and eliminate or delay the failure of CNC equipment as much as possible before the failure occurs.

1. Correct use of equipment for CNC plasma cutting machine

The correct use of CNC plasma cutting machine is the key to reducing equipment failure and prolonging its service life, and it occupies a very important position in preventive maintenance. According to statistics, one-third of the failures are caused by human beings, and general maintenance (such as oil injection, cleaning, inspection, etc.) is carried out by the operator. The solution is to emphasize equipment management, use and maintenance awareness, strengthen Business and technical training, improve the quality of operators, so that they can master the performance of CNC machine tools as soon as possible, strictly implement equipment operation procedures and maintenance procedures, and ensure that the equipment runs in a reasonable working state.

2. Daily inspection of the operator of the CNC plasma cutting machine

The operator is the direct user of the CNC plasma cutting machine. In order to ensure the normal operation of the CNC plasma cutting machine, the CNC operator is required to perform the following items every day: Check all protective plates, military shells and whether the operation is appropriate, step in the entire stroke. Enter each axis and observe for smooth operation, make sure limit switches on all axes are working properly and adjusted to the appropriate limit positions, check the rails for signs of scratches or excessive wear, check that the rail cleaners are not damaged, touch the rails Check for proper lubrication.

3. Patrol inspection equipment of CNC plasma cutting machine

According to the advanced, complex and intelligent characteristics of CNC plasma cutting machine, its maintenance and maintenance work is much more complicated and demanding than ordinary equipment.

Maintenance personnel should pass regular inspections, such as the operation of the exhaust fan of the CNC system, whether the cabinet and the motor are hot, whether there is abnormal sound or odor, and whether the pressure gauge indicates normal. Whether there is leakage of each pipeline and joint, whether the lubrication condition is good, etc., actively do a good job in fault and accident prevention, if any abnormality is found, it should be solved in time, so as to eliminate the fault in the bud, so as to reduce everything that can be avoided. Loss.